Plastic chimneys - Almeva
MK KOLEKT Kondi - products group which serves to drain combustion gases from condensing and low-temperature boilers. This products group consist of plastic chimney elements - almeva.
Chimney highest temperature of combustion gases on the socket of the flue of the appliance 120 oC.
It is designated primarily for pressure and high pressure combustion gas routes (Pressure inside the chimney liner is during operation much higher than outside). It can also be used for chimneys with natural draught.
It is not designated for combustion gas routes where the burning of ashes can occur.
It is suitable for chimneys that are according to plan operated in wet operating mode.
Usable only for combustion gas routes from appliances burning gas fuel, precisely ground gas (L, H) and liquid fuel (LTO with the contents of sulfur ≤0,2 %, kerosene).
almeva plastic elements is made in Switzerland.
We offer the following MK KOLEKT Kondi products group chimney models:Buy Online! Product catalogues
- STARR - Consists of PPH rigid pipes and blocks DN 60 – 315 mm and accessories, and is designated primarily for interior and as liners in straight chimney flues, connection with socket connectors with EPDM seal;
- FLEX- Consists of PPH flexible pipes and blocks DN 60 – 200 mm and accessories, and is designated primarily as liners in straight and deflecting chimney flues, connection with sleeve nuts with EPDM seal;
- LIK - Consists of concentric rigid pipes and blocks PPH/PPH DN 80/125 mm, designated for combustion gas routes in interior areas, connection with socket connectors with EPDM seal.
All chimney parts of the Almeva system are certificated.